Inam Market
Phone +923449862916


Hinges are used to join two parts together while allowing them to rotate relative to each other. They typically have two flat faces, known as leaves. One leaf is attached to each of the parts being joined.

The leaves usually have holes in them, so that screws or bolts can be used, and form into a knuckle. This is so a pin can pass through to form the connection between the two rotating parts.

Most hinges provide a perfect revolute joint. This means that only relative rotation about a single axis is allowed between the objects that are joined by the hinge. All translations, as well as rotations about any other axis, are prevented


Service We Offering

We are offering Pipes Cements Hinges Wash basin Commode Tiles Woven Wire and etc.

Design Engineering

  • Component & Subsystem
  • Value Engineering
  • Material Complaince

Product Engineering

  • Seating and cockpit
  • Product Management
  • Light Weighting

Advanced Engineering

  • Component & Subsystem
  • Value Engineering
  • Material Complaince

Hinges are either right or left and come in different materials. You can use a hinge that will be visible or concealed. The point is, you have a lot of choices, many of which are butt hinges.

A corner hinge sits flush to the surface. To prevent tampering, they’re mounted internally, although external metal corner hinges – usually used on machines – are an exception. Corner hinges contain a pin that you can take out when the door is open.

Think of doors that see frequent use. For applications like this, you want lift-off hinges that simplify the removal of doors when you need easy access to maintenance and repair. When the panel that the hinge is attached to is opened, the top part of the hinge lifts off from the bottom part.